The K2 Series adapts to 100% of installations, even partial refurbishments where only the controller is replaced. With a motherboard suitable for all drive systems (1- and 2-speed electrical, 3VF, hydraulic), an interface (I/O) for connection of controllers, operators, etc. and a transformer that takes the supply from any existing voltage, adaptation is quick and easy. These controllers allow you to work with traditional installation (wire to wire), Mixed (CAN bus in the cabin and traditional on the landing) or total CAN bus.
K2 controllers are also available with various models of inspection box for installation in the cabin roof.
With more than 43,000 units installed worldwide, EDEL's K2 series continues to excel in versatility and durability, making it one of the most reliable and robust controllers on the market.
Specially focused and designed for the refurbishment of lifts.
The combination of motherboard and I/O board ensures full compatibility with the elements that can be found in a refurbishment. Its robust design gives the controller durability throughout the life of the equipment.
CCM CONTROLLER Cabinet dimensions according to installation characteristics. Machine control (see features of the K2 series)
GSM DEVICE (Voice and data) For compliance with standard EN 81-28 or for EDELCONNECT controller communication (optional).
PRE-ASSEMBLED INSTALLATION MACHINE ROOM Elements installed in the machine room: connection limiter, conduit, hose-motor, emergency stop (optional), circuit breakers (optional)...
FLAT HOSE, CONNECTION CONTROLLER-CABIN Series K2 wire-to-wire in floors. Series and signals for all elements located in the cabin with quick connectors at both ends.
INSPECTION BOX WITH REMOTE CONTROL Metal box with inspection control containing connection interface for the control and distribution of all the cabin elements. With alarm in accordance with regulations. It has additional space to accommodate all the necessary elements depending on the type of installation. Interconnection of cabin displays with CAN-BUS and binary communication.
END OF RUN By contact blade or sheaves.
CABIN BUTTON PANEL Cabin button panel wired for quick connection. LCD, TFT or seven-segment displays as chosen by the customer. Intercoms and emergency telephones. Connection with inspection box via plug & play connectors
SHAFT INSTALLATION Wiring hose with floor signal connectors, safety features and pit elements. The control signals for graphic displays are routed through separate hoses with the same characteristics. With plug &play connection.
BUTTON PANELS AND EXTERNAL DISPLAYS Position indication systems, next departure arrows, gong, etc. Wide range of buttons to comply with applicable regulations.
ALARM SYSTEMS FOR FIRE FIGHTER FUNCTIONS Adapted to any regulation and installation to guarantee optimum operation. Strip of LED lights (optional)
SHAFT ELEMENTS Shaft boxes with safety elements, shaft stop and shaft light switch.
CABIN POSITIONING SYSTEM Standard positioning by magnets. Absolute encoder system with CAN bus communication to the controller for millimetric control of the cabin movement. Stability of the positioning of the
SEISMIC SYSTEM Seismic motion alarm system